Passive and active mechanics of Banksia seed pods

Biological materials consist of only a few basic building blocks, namely sugars, proteins and a few minerals which are assembled into structurally complex materials to ensure (multi)functionality for the particular organism. Prominent examples are bone or nacre, composites of mineral and protein possessing high stiffness and strength. Apart from mineralized materials, protein- and sugar-based materials such as spider dragline silk or plant fibres achieve similarly high values. On the other end of the scale are soft materials with 3 to 4 magnitude lower stiffness and strength values (eg. parenchymatic tissue or artery). Common concept for all biological materials is that a wide range of material properties is achieved by structuring rather than changing their chemical components and frequently materials combine high strength and toughness when needed. A comprehensive understanding of the structure function relationships of biological materials requires measurements of mechanical properties at a range of different length scales, often in combination with other techniques (eg. X-rays, microscopy, spectroscopy). This approach will be illustrated on the example of plants and especially dead but multifunctional tissues such as the seed pods of Banksia attenuata, a native Australian species. The seed storing pods can remain on the plant for up to 15 years without metabolism before they open upon elevated temperatures (eg. caused by bush fires). During the storage period the seed pod material must passively resist weathering, microbial degradation and attacks by bird beaks. Interestingly, the seed pods do not open at uniform temperatures. Instead, opening temperatures change gradually along a climatic South-North gradient increasing towards North. We were able to identify the “temperature sensor” of the seed pods: the inner curvature of the layered follicles gradually increases providing Northern seed pods with a higher flexural rigidity. Opening is activated by a temperature-dependent decrease of the elastic modulus of the inner resistance layer, allowing pre-stresses to be released. However, the initial opening is not sufficient to release the seeds, further opening is fueled by moisture changes which lead to directional swelling and at the same time to changing mechanical properties in different layers of the seed pod. The findings on Banksia seed pods provide inspiration for self-sensing, moving and actuating materials and systems. We expect a comparably easy transfer into technical application because metabolism and biological signaling is not required for functionality. Since the material consists only of a few basic building blocks, namely cellulose, hemicelluloses, lignin, tannins and waxes, recycling and sustainable material use seem to be much easier compared to multi-component composites

The Small World of Osteocytes: Connectomics of the Lacuno-Canalicular Network in Bone

Osteocytes and their cell processes reside in a large, interconnected network of voids pervading the mineralized bone matrix of most vertebrates. This osteocyte lacuno-canalicular network (OLCN) is believed to play important roles in mechanosensing, mineral homeostasis, and for the mechanical properties of bone. While the extracellular matrix structure of bone is extensively studied on ultrastructural and macroscopic scales, there is a lack of quantitative knowledge on how the cellular network is organized. Using a recently introduced imaging and quantification approach, we analyze the OLCN in different bone types from mouse and sheep that exhibit different degrees of structural organization not only of the cell network but also of the fibrous matrix deposited by the cells. We define a number of robust, quantitative measures that are derived from the theory of complex networks. These measures enable us to gain insights into how efficient the network is organized with regard to intercellular transport and communication. Our analysis shows that the cell network in regularly organized, slow-growing bone tissue from sheep is less connected, but more efficiently organized compared to irregular and fast-growing bone tissue from mice. On the level of statistical topological properties (edges per node, edge length and degree distribution), both network types are indistinguishable, highlighting that despite pronounced differences at the tissue level, the topological architecture of the osteocyte canalicular network at the subcellular level may be independent of species and bone type. Our results suggest a universal mechanism underlying the self-organization of individual cells into a large, interconnected network during bone formation and mineralization

Special issue: bioinspired architectural and architected materials

Peer Reviewe

An Introduction into the Physics of Self-folding Thin Structures

Preprint. The article was published in: Friedman, Michael/Schäffner, Wolfgang (eds.) (2016): On Folding. Towards a New Field of Interdisciplinary Research. Bielefeld: transcript, pp. 175–210

Self-organized rod undulations on pre-stretched textiles

Textile technology is a traditional approach to additive manufacturing based on one-dimensional yarn. Printing solid rods onto pre-stretched textiles creates internal stresses upon relaxation of the pre-stretch, which leads to buckling-induced out-of-plane deformation of the textile. Similar behaviours are well known to occur also in biological systems where differential growth leads to internal stresses that are responsible for the folding or wrinkling of leaves, for example. Our goal was to get a quantitative understanding of this wrinkling by a systematic experimental and numerical investigation of parallel rods printed onto a pre-stretched textile. We vary rod thickness and spacing to obtain wavelength and phase coherence of the wrinkles as a function of these parameters. We also derive a simple analytical description to rationalize these observations. The result is a simple analytical estimate for the phase diagram of behaviours that may be used for design purposes or to describe wrinkling phenomena in biological or bioinspired systems.Deutsche Forschungsgemeinschaft https://doi.org/10.13039/501100001659Peer Reviewe

The Earth\u27s Lithosphere Inspires Materials Design

Structural patterns found in living organisms have long been inspiring biomimetic materials design. Here, it is suggested that a rich palette of patterns occurring in inanimate Nature, and especially in the Earth\u27s lithosphere, could be not less inspirational for design of novel architectured materials. This materials design paradigm is referred to as lithomimetics and it is demonstrated that some of the patterns found in the lithosphere can be emulated by established processes of severe plastic deformation. This opens up interesting avenues for materials design in which potentially promising structural patterns are borrowed from the lithosphere\u27s repository. The key aim here is to promulgate the “lithomimetics” paradigm as a promising approach to developing novel architectured materials

New Materials through Bioinspiration and Nanoscience

Chemistry and Chemical Biolog

Architecturing materials at mesoscale: some current trends

This article overviews several areas of research into architectured materials which, in the opinion of the authors, are most topical and promising. The classes of materials considered are based on meso scale designs inspired by animate and inanimate Nature, but also on those born in the minds of scientists and engineers, without any inspiration from Nature. We present the principles governing the design of the emerging materials architectures, discuss their explored and anticipated properties, and provide an outlook on their future developments and applications

Structural purity of magnetite nanoparticles in magnetotactic bacteria

Magnetosome biomineralization and chain formation in magnetotactic bacteria are two processes that are highly controlled at the cellular level in order to form cellular magnetic dipoles. However, even if the magnetosome chains are well characterized, controversial results about the microstructure of magnetosomes were obtained and its possible influence in the formation of the magnetic dipole is to be specified. For the first time, the microstructure of intracellular magnetosomes was investigated using high-resolution synchrotron X-ray diffraction. Significant differences in the lattice parameter were found between intracellular magnetosomes from cultured magnetotactic bacteria and isolated ones. Through comparison with abiotic control materials of similar size, we show that this difference can be associated with different oxidation states and that the biogenic nanomagnetite is stoichiometric, i.e. structurally pure whereas isolated magnetosomes are slightly oxidized. The hierarchical structuring of the magnetosome chain thus starts with the formation of structurally pure magnetite nanoparticles that in turn might influence the magnetic property of the magnetosome chains

Evidence for an elementary process in bone plasticity with an activation enthalpy of 1 eV

The molecular mechanisms for plastic deformation of bone tissue are not well understood. We analysed temperature and strain-rate dependence of the tensile deformation behaviour in fibrolamellar bone, using a technique originally developed for studying plastic deformation in metals. We show that, beyond the elastic regime, bone is highly strain-rate sensitive, with an activation volume of ca 0.6 nm3. We find an activation energy of 1.1 eV associated with the basic step involved in the plastic deformation of bone at the molecular level. This is much higher than the energy of hydrogen bonds, but it is lower than the energy required for breaking covalent bonds inside the collagen fibrils. Based on the magnitude of these quantities, we speculate that disruption of electrostatic bonds between polyelectrolyte molecules in the extrafibrillar matrix of bone, perhaps mediated by polyvalent ions such as calcium, may be the rate-limiting elementary step in bone plasticity